Filter
Top Products
14
15
OPERATION
OPERATING THE LASER LEVEL
See Figures 9 - 10.
n Place the level in the area where you want
the laser line projected.
n If a true vertical line or level horizontal line
is desired, level the tool by centering the
bubbles inside the vials located on top of
the laser head.
NOTE: To ensure plumb lines or level hori-
zontal lines across adjacent surfaces, level
both vials and position the tool directly in
front of the work area.
n Turn on the laser.
n Rotate the laser head to position the laser
line where needed.
n With the laser beam pointed away from
you, rotate the laser lens to achieve the
desired angle of beam.
NOTE: Due to construction inaccuracy, walls
may not be perfectly straight. This may cause
the laser to have slight variances when in the
level position.
Fig. 10Fig. 9
TOP VIEW
CENTERED
LEVEL