Filter
Top Products
4
SPECIFIC SAFETY RULES
■ Hold tool by insulated gripping surfaces when performing an operation where the tool may contact hidden
wiring. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.
ADDITIONAL SAFETY RULES
■ Know your power tool. Read operator’s manual
carefully. Learn its applications and limitations,
as well as the specific potential hazards related
to this tool. Following this rule will reduce the risk of
electric shock, fire, or serious injury.
■ Always wear safety goggles or safety glasses
with side shields when operating this product.
Failure to do so could result in dust, shavings, or
loose particles being thrown into your eyes, resulting
in possible serious injury.
■ Protect your lungs. Wear a face mask or dust
mask if the operation is dusty.
■ Protect your hearing. Wear hearing protection
during extended periods of operation.
ADDITIONAL CORDLESS TOOL RULES
■ Cordless tools do not have to be plugged into an
electrical outlet; therefore, they are always in oper-
ating condition. Be aware of possible hazards when
not using your cordless tool or when changing
accessories. Following this rule will reduce the risk of
electric shock, fire, or serious personal injury.
■ Do not place cordless tools or their batteries near
fire or heat. This will reduce the risk of explosion and
possibly injury.
■ A damaged battery is subject to explosion. To avoid
serious personal injury, properly dispose of a damaged
battery.
■ Batteries vent hydrogen gas and can explode in
the presence of a source of ignition, such as a pilot
light. To reduce the risk of serious personal injury,
never use any cordless product in the presence of open
flame. An exploded battery can propel debris and
chemical. If exposed, flush with water immediately.
■ Use only accessories that are recommended by
the manufacturer for your model. Accessories that
may be suitable for one tool, may create a risk of in-
jury when used on another tool.
■ Keep the tool and its handle dry, clean, and free
from oil and grease. Always use a clean cloth when
cleaning. Never use brake fluids, gasoline, petroleum-
based products, or any strong solvents to clean your
tool.
SERVICE
■ Tool service must be performed only by qualified
repair personnel. Service or maintenance per-
formed by unqualified personnel could result in a risk
of injury.
■ When servicing a tool, use only identical replace-
ment parts. Follow instructions in the Mainte-
nance section of this manual. Use of unauthorized
parts or failure to follow Maintenance Instructions
may create a risk of shock or injury.
GENERAL SAFETY RULES
■ Do not charge cordless tool in a damp or wet
location. Following this rule will reduce the risk of
electric shock.
■ For best results, your cordless tool should be charged
in a location where the temperature is more than
50°F but less than 100°F. Do not store outside or in
vehicles.
■ Under extreme usage or temperature conditions,
battery leakage may occur. If liquid comes in con-
tact with your skin, wash immediately with soap
and water, then neutralize with lemon juice or
vinegar. If liquid gets into your eyes, flush them
with clean water for at least 10 minutes, then seek
immediate medical attention. Following this rule will
reduce the risk of serious personal injury.