Filter
Top Products
© 2008 • All rights reserved. 13
HDR44 4x4 High Defi nition Video Router
SOURCE IR OUTPUTS
Connect a standard IR Emitter (ATON AIE2, for example) from the Source IR OUT port on the
rear of the HDR44 to the IR receiver on the front of the audio/video source (see Figure 3-4).
The four source IR outputs are source specifi c. For examle, IR port “1” must be mounted to the
video source connected to “Component Video Input 1”. For sources that have an IR Input port
on the back of the unit, use a 3.5mm to 3.5mm mono interconnect cable instead .
IR Emitter
BluRay Disc™
HDR44
3.5mm mono
interconnect cable
Figure 3-4 SOURCE IR OUTPUTS
Component Video Connections
P
R
P
B
Y
SPDIF
SPDIF
IR
OUT
OUT
IR IN
L
R
BluRay Disc™
HDR44
R44WP
HD Video Display
IR Receiver
Figure 3-5: Component Video Signal Chain