Filter
Top Products
RANGECONTROL
PROGRAM
CANCELS BAKE, STATUS
BROIL OR DISPLAY
CLEAN OPERATION
\
CLOCK /
TIMER TEMPERATURE FUNCTION
DISPLAY DISPLAY DISPLAY
UP ARROW PAD
{INCREASES TIME
OR TEMPERATURE)
PRESS TO TURN
TIMER ON AND OFF
SET AUTOMATIC
OVEN OPERATIONS
DOWN ARROW PAD
(OECREASES TIME
OR TEMPERATURE)
Your range Is controlled with a touch. You now have the
ease of setting the following operations:
CLOCK TIMER
BAKE DELAY BAKE
BROIL CLEAN
DELAY CLEAN
The UP or DOWN arrow Is used to set an amount of time
or change thetemperature you want to use. By pressing
and holding down either pad the numbering will change
quickly. By pressing and releasing either pad the
numbering will change slowly.
DISPLAY:
Once you have programmed your control for any
operation, you can display the setting by pressing the
appropriate pad. For example, if you are using the
TIMER and want to see the time of day, press CLOCK.
The display will show the time of day.
TONES:
The end-of-cycle tone will sound at the end of timer use
and automatic oven functions. The end-of-cycle tone is
3 short beeps followed by 1 beep every 6 seconds that
repeat unUl you press any operation. TO cancel the end-
of-cycle tone, press any key except the UP or DOWN
arrow key. If you would like to eliminate the repeating
beeps, push and hold CLEAR/OFF for ten seconds. To
return the 1 beep every 6 seconds, push and hold
CLEAR/OFF for 10 seconds.
F.CODE:
I1the time display beeps continuously and flashes an
"F" followed by a number, you have a function error
code. Note the number after the "P', Press CLEAR/
OFF. Allow oven to cool for I hour. If problem repeats,
disconnect all power to the range and call for se_lce.
Advise your service technician of the number following
the "F" in the display.
PRESS
NOTE: You cannot set BAKE, BROIL or COOK
TIME while the oven door is in the locked
position. If you try, the word "DOOR" will
appear in the display. The oven door
lock is to be used for Sell-Cleaning only.
9 NCERC18-2