Filter
Top Products
DE
EN
FR
IT
ES
NL
Product overview
6
Indications and displays on the charger
Operation indication
Status indication
LED indication for “automatic copying” function
When the “automatic copying” function is available, the green LED COPY
AVAILABLE » lights up. This is the case when
• at switch-on of the charger, a receiver is already placed into the
“master” charging compartment · or
you place a receiver into the “master” charging compartment · or
you switch on a receiver that is already placed into the “master”
charging compartment · and
• at least one receiver is placed into one of the “slave” charging
compartments ³ and
• no network connection exists.
When the “automatic copying” function is not available, the green LED
COPY AVAILABLE » goes off. This is the case when
• you remove the receiver from the “master” charging compartment ·
or
• all “slave” charging compartments ³ are empty or
• the “Conference Control” software accesses the charger or
• you do not press the COPY button ¿ within two minutes.
LED POWER ² Meaning
lights up red The mains switch ¶ is in position “I”,
the mains supply is switched on.
is off The mains switch ¶ is in position “0”,
the mains supply is switched off.
LED SELECT ´ Meaning
flashes yellow You have just switched on the device (LED flashes for
a maximum of 2 seconds) or an error has occured.
lights up
yellow
The charger is connected to a PC and
the “Conference Control” software is running and has
established a network connection with the charger and
you have selected the charger or at least one receiver
placed into the charger via the “Conference Control”
software.
is off Neither the charger nor a receiver have been selected
via the “Conference Control” software.
·
LED Copy
Available »
Meaning
lights up green The “automatic copying” function is available
(see below).
if off The “automatic copying” function is not available
(see below).