Filter
Top Products
-11-
The following is a description of the components
shipped with the Shop Fox
®
W1676. It is recom-
mended that the components be laid out in a sim-
ilar fashion to those in Figures 7 and 8. This will
help in identification before beginning assembly.
Should any part be missing, examine the packag-
ing carefully. If any key parts are missing, call
Woodstock International, Inc. at 360-734-3482 or
e-mail: tech-support@woodstockint.com
.
1. Sanding Unit 1
2. Sanding Belt 1
3. Sanding Disc 1
4. Cast Iron Disc 1
5. Idler Roller 1
6. Back Stop 1
7. Miter Gauge 1
8. Work Table 1
9. Table Support Rod 1
10. Quick Release Handle 1
11. Dust Port 1
12. Idler Roller Guard 1
13. Bolt Bag 1
14. 2
1
⁄2" Dia. Dust Port 1
15. Cabinet Stand 1
Item QTY.
Figure 7. Stand and sanding unit.
Figure 8. Component layout.
Contents of the Bolt Bag
QTY. DESCRIPTION
LOCATION
4
5
⁄16''-18 x
1
⁄2'' Hex Bolts
Stand/Base
4
5
⁄16'' Flat Washers
Stand/Base
4
5
⁄16''-18 x 1'' Hex Bolts
Stand /Feet
4
5
⁄16'' Flat Washers
Stand /Feet
4
5
⁄16''-18 Hex Nuts
Stand /Feet
4
3
⁄16" Phillips
®
Screws Dust Port
4
3
⁄16" Washers Dust Port
4
3
⁄16" Hex Nuts Dust Port
1 Long 4mm Allen
®
Wrench
4 Rubber Feet Stand /Feet
1
34
5
6
7
8
9
10
14
15
11
12
13
2