Column ring in the correct position.
Seat the rack tapered-point into the bevel
that is cut into the column support tube
(see).
Slide the column ring onto the column with
the inside bevel in the down position until
the rack tapered-point seats into the bevel
(see).
Position the column ring so the table
bracketandrackcanjustrotatearound
the column without binding.
Carefully, snug the set screw to hold the
columnringinplace.Over-tighteningthe
column ring will distort or split the column
ring.
Column Ring
Bevel
Bevel and rack seated correctly.
Tapered Rack
Point and
Column Support
Tube Bevel.
Set
Screw
-11-