Woodstock W1670 Cordless Drill User Manual


  Open as PDF
of 44
 
-17-

Thetablecanbeadjustedforheight,rotation,
andangle.TheW1670addsthefourthadjust-
ment of table distance from column.
 Table or table support parts are not
interchangeablebetweentheW1669andthe
W1670drillpresses(see).

 Loosenthetablelocklever.
 Turn the hand crank to raise or lower the
table.
 Tighten the table lock lever.
 FortheW1670,loosenthetabletiltlock
bolt (see);orfortheW1669,
loosen the cap screw.
 Turn the index pin draw nut clockwise and
draw the index pin out of the casting until
you can rotate the table to your desired
angle(see).
 Use this index pin only for indexing
the table to the “Zero degree” position.
Toindexthetablebacktothezero
position, back off the draw nut, turn the
tabletozero,taptheindexpinbackinto
the casting, and tighten the table tilt lock
bolt.
 Tighten the tilt table lock bolt or cap
screw, and double check your angle.
W1669Tablesupportassembly.
W1670Tablesupportassembly.
Tilt mechanism and lock bolt.
Table-Tilt
LockBolt
(W1670)
or
Table-Tilt
LockCap
Screw
(W1669)
Index Pin
and
Draw Nut
Tilt
Scale

 previous next