-13-
Your keyed drill chuck attaches to the drill
spindle.Whenproperlyjoined,theJT-33
tapers on the spindle and inside the chuck cre-
ate an almost permanent connection.
Clean the drill chuck and spindle with min-
eral spirits and follow all safety warnings
onthecontainer(see ).
: Failure to clean the tapered mating
surfaces of the spindle and drill chuck may
result in a loose or wobbly chuck.
Usetheprovidedchuckkeytoadjustthe
jawsofthechuckuntiltheyareinsideof
thedrillchuckbody(see ).
Place the drill chuck on the spindle and tap
the chuck onto the spindle with a block of
woodoradead-blowhammer(see
).use a metal hammer to seat
thedrillchuckontothespindle!
Seating chuck into spindle.
Clean the chuck before installation.
Chuck Jaws
Recessed and
Protected
Inside of
Chuck