Filter
Top Products
35
Maintenance Notes
Maintenance Schedule
• Every 2 Hours of Running Time: Clean and lubricate table top, miter slot and fence.
• Every 3 Hours of Running Time: Check blade tracking, guide column and table-to-blade.
Check gap on guide blocks and thrust bearings. Check blade
tension.
• Every 5 Hours of Running Time: Oil guide post with light machine oil.
• Every 6-8 Hours of Running Time: Replace blades.
• Every Year: Replace the rubber V-Belt (recommended).
• Every 2 Years: Replace the rubber tires on the wheels (recommended).
DATE MAINTENANCE PERFORMED