Filter
Top Products
-6-
W1681 Buffing Assembly
SETUP
Keep machine disconnected from
power until instructed otherwise.
This machine has been carefully packaged for safe
transportation. If you notice the machine has been
damaged during shipping, please contact your authorized
Shop Fox dealer immediately.
Unpacking
SETUP
The following is a description of the main components
shipped with the Model W1681. Lay the components out
to inventory them.
Note: If you can't find an item on this list, check the
mounting location on the machine or examine the
packaging materials carefully. Occasionally we pre-install
certain components for safer shipping.
Box Inventory Qty
A. Buffing Assembly* ..........................................1
B. V-Belt ........................................................1
C. Wheel Flanges ..............................................4
D. Arbor Nuts ..................................................4
*Motor and motor pulley are not included.
Inventor y
Cleaning Machine
The shafts of your buffer are coated with a waxy grease
that protects them from corrosion during shipment. Clean
this grease off with a solvent cleaner or citrus-based
degreaser. DO NOT use chlorine-based solvents such as
brake parts cleaner or acetone—if you happen to splash
some onto a painted surface, you will ruin the finish.
ALWAYS work in well-
ventilated areas far from
possible ignition sources
when using solvents to
clean machinery. Many
solvents are toxic when
inhaled or ingested. Use
care when disposing
of waste rags and
towels to be sure they
DO NOT create fire or
environmental hazards.