Filter
Top Products
-18-
W1713 Owner's Manual (Mfg. Since 6/03)
OPERATIONS
Blade Speed
The blade speed can be varied between 550 and 1650
SPM (strokes per minute). Blade speed adjustment is made
with the variable speed/power knob on the front of the
scroll saw, as shown in Figure 14.
Figure 14. Variable speed/power knob.
Variable Speed/
Power Knob
Blade Selection Chart
Use the information in the chart below as a guideline for selecting the right blade and blade speed for
your operation.
Teeth Per Inch Width Thickness SPM Workpiece Material
10 TPI 0.110 " 0.020" 1200–1650 General purpose blade for cutting hard and
soft woods between
3
⁄16"–2". Also good for
plastics, paper, felt, and bone.
15 TPI 0.110 " 0.020" 700–1200 Thin wood and plastic between
3
⁄32" –
1
⁄2".
18 TPI 0.095" 0.010" 550–700 Good for tight radius cutting in thin hard
and soft woods between
3
⁄32"–
1
⁄8". Also good
for thin pieces of bone, ivory, plastics and
veneer.
Figure 15. Blade selection chart.