Filter
Top Products
Model W1761/W1762
12" Table Saw
Manual Update
(For Models Mfg. Before 1/10; Sold After 7/10)
Phone #: (360) 734-3482 • Online Tech Support: tech-support@shopfox.biz • Web: www.shopfox.biz
COPYRIGHT © AUGUST, 2008 BY WOODSTOCK INTERNATIONAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
Printed in USA#13232BL
We made a few changes to this table saw since the manual was originally written. The saw you received
has a different blade guard with a clear shield, removable anti-kickback pawls, and a new mounting
block that makes blade guard and riving knife installation/removal and adjustments much easier. As
part of this change, the table saw is now equipped with a one-piece 1" arbor. This new arbor no longer
accepts blades with a
5
⁄8" arbor; thus, only blades with a 1" hole can be installed. (We apologize if this
change causes any inconvenience.) Aside from these items, all other content in the original manual
applies to your machine.
Before operating your new machine, you MUST read and understand this manual update AND the original
manual to reduce the risk of injury from improper use or setup. Since this update covers changes made
to the machine after the owner's manual was printed, you MUST keep this update with your owner's
manual for future reference.
If you have questions, contact our Technical Support at (360) 734-3482 or email
tech-support@shopfox.biz.
Inventory Differences
The inventory list shown in the original manual
will not exactly match what you receive with
your machine. Most notably, you will find a
different blade guard and you will not find the
5
⁄8" arbor insert.
Figure 1. Notable inventory differences you will
find when reviewing the inventory list in the
original manual.
Old
New
Important Changes to Assembly
The new guard spreader and riving knife have size
requirements for aftermarket blades that must be
met. These instructions are provided in following
pages in this update.
You can generally substitute the blade and blade
guard installation/adjustment instructions in this
update for those in the original manual.