Filter
Top Products
-28-
W1761/W1762 12" Table Saw with Riving Knife
OPERATIONS
Figure 38. Disabling switch.
Safety Pin
Disabling On/Off Switch
To disable the saw and prevent accidental startup, insert
the safety pin through the holes in the ON button, and
insert the end of the chain into the pin as shown in
Figure 38
.
Blade Selection
Ripping blade features (see Figure 39):
• Best for cutting with the grain of the workpiece.
• 20-40 teeth.
• Flat-top ground tooth profile.
• Large gullets for large chip removal.
Crosscut blade features (see Figure 40
):
• Best for cutting across the grain of the workpiece.
• 60-80 teeth.
• Alternate top bevel tooth profile.
• Small hook angle and a shallow gullet.
Figure 40. Crosscutting blade.
Figure 39. Ripping blade.