Filter
Top Products
Model W1784 (Mfg. Since 2/07)
-2-
for the
tool. Make sure your air hose is in
good condition and is long enough
to reach your work without
stretching.
Do
not wear loose clothing, gloves,
neckties, rings, bracelets, or
other jewelry which may get
caught in moving parts. Non-slip
footwear is recommended. Wear a
protective hair covering to contain
long hair.
Also use a face or dust mask
if cutting operation is dusty.
Everyday eyeglasses only have
impact resistant lenses, they are
NOT safety glasses.
Air escaping from
pneumatic tools can exceed safe
exposure limits and may cause
hearing damage with prolonged
exposure.
Use clamps or a
vise to hold work when practical.
It is safer than using your hand
and frees both hands to operate
tool.
Keep tools lubricated and clean
for best and safest performance.
Follow instructions for lubricating
and changing accessories.
Do not
carry tool with hand on trigger
and always disconnect from air
when not in use.
before
servicing, changing accessories, or
moving to another location.
Keep proper
footing/balance at all times.
Consult owner’s
manual for recommended
accessories. The use of improper
accessories may cause risk of
injury.
Check for binding
and alignment of parts, broken
parts, part mounting, loose bolts,
and any other conditions that may
affect machine operation. Repair
or replace damaged parts.
Disconnect
the air hose and do not leave tool
until it is relieved of any built up
pressure.
Seek formal training
or research books or magazines
that specialize in pneumatic tools.
Hoses can easily become a tripping
hazard when laid across the floor
or spread out in a disorganized
fashion.