Woodstock W1822 Saw User Manual


  Open as PDF
of 24
 
SETUP ACCESSORIES
PARTS
OPERATIONS
SAFETYINTRODUCTION
USE THE QUICK GUIDE PAGE LABELS TO SEARCH OUT INFORMATION FAST!
Contents
INTRODUCTION .....................................2
Important Notice! ................................ 2
Woodstock Technical Support .................. 3
Specifications ..................................... 3
SAFETY ...............................................4
Standard Machinery Safety ..................... 4
Additional Safety for Sliding Table Saws ..... 6
SETUP ................................................7
Unpacking ......................................... 7
Inventory .......................................... 7
Assembly ........................................... 8
OPERATIONS....................................... 13
Operation Overview ........................... 13
Crosscut Fence ................................. 14
Extension Fence ................................ 14
Extension Table ................................. 14
Flip Stop ......................................... 15
Crosscutting ..................................... 15
Miter Cutting .................................... 16
PARTS .............................................. 17
Table ............................................. 17
Fence ............................................. 18
WARRANTY ........................................ 21
Important Notice!
Table Saw Modifications Required for Installation
The Model W1822 can be installed on a wide range of table saw brands and sizes; however, installation
usually requires permanent modification to your table saw or its parts. This modification can include
cutting, grinding, drilling, and tapping threads in metal surfaces. Read the following to determine what
type of modification may be required for your saw:
• IfyoursawtabledoesnothavemountingholesthatmatchthoseintheModelW1822,youwill
need to drill (and possibly tap) new holes in the saw table.
• IfthefencerailsonyoursawpreventinstallationoftheModelW1822,thenyouwillneedto
either:
— Cut off the ends of the rails (this is the easiest and fastest option).
— Re-mount the rails farther to the right, which may also require you to drill (and possibly tap)
new holes in your table and cut small notches into your rails for access to T-slots in your saw’s
table.
• Ifthepowerswitchonyoursawismountedontheleft,youmayneedtore-mountittoanew
location, such as the non-moving base portion of the Model W1822 or a new location on your fence
rails. Remounting the switch may require drilling and tapping new holes.
Before beginning any modification to your table saw or its parts, read the entire assembly section in this
manual to make sure the person making the modification is capable of performing the required tasks,
and to make sure the Model W1822 will fit your saw.
 previous next