Filter
Top Products
-5-
Model W1831 (For Machines Mfg. Since 2/12)
INTRODUCTION
Controls and Features
Figure 1. Machine identification.
Spindle Hex Nut
Spindle
Drum and Sanding
Sleeve
ON/OFF Paddle Switch w/Disabling Key
Table Insert
Table
Table Inserts
Sander Body
Power
Cord
Dust Port
Drums and Sanding Sleeves
Spindle Washer
For Your Own Safety Read This Manual
Before Operating Spindle Sander
a) Wear eye protection.
b) Support workpiece on worktable.
c) Minimize pinch hazards. Use the smallest
table insert possible with sanding drum.
d) Avoid kickback. Feed workpiece against
rotation of drum.
e) Avoid entanglement with spinning drum.
Do not wear gloves, necktie, or loose
clothing. Tie back long hair.