SIIG 04-0918A Work Light User Manual


 
5
NOTE: Please use the included Mini USB charging
cable to charge the LED Light. Using a different USB
cable is not recommended.
3. Wait for the Charging Status LED goes off, the charging
process is complete.
NOTE: Please make sure the LED Folding Light is
fully charged before use.
4. Before initial use, please remove the CR2025 Battery
protection tab to power on the Time and Temperature
Display.
Pull out the protection tab
before initial use
Figure 7
5. For future battery replacement, rotate the battery cover
clockwise using a coin or other similar shaped object
to remove it. Insert a new CR2025 with the positive
side facing up, then reinstall the battery cover by
turning it counter clockwise.
CR2025 battery
rotate clockwise to
open the cover
Figure 8