7
Time/Date Settings
Press the Display Settings Buttons on the rear side of the
change the Time/Date settings.
MODE
Press the button to switch between "time display
mode" or "alarm mode".
* In time display mode, it shows TIME on the
display; in alarm mode, a clock symbol appears
instead.
SET
Press SET button and the section you are going
to change will start blinking. To change the
settings, press UP/DOWN buttons; to keep it the
same, just press SET button again, and you'll
proceed editing the next section.
When the setup is complete, press the SET
button again to save the change.
NOTE: The "Day" information will change
automatically. No need to adjust it manually.
UP
Press the SET then UP button to set your
Time/Date backward.
DOWN
Press the SET then DOWN button to set your
Time/Date backward.