SIIG 04-0918A Work Light User Manual


 
6
6. Pull up or press down the upper light arm to the best
angle to fit your needs.
Figure 9a Figure 9b
sensor
When fully folded, the LEDs
go off automatically
NOTE: There's a sensor on the back of the base stand
(See Figure 9a). If the unit is fully folded, the LED
lights turn off automatically (See Figure 9b).
LED Light Adjustment
Use the One-Touch Dimmer Switch to adjust the brightness
as needed.
Touch one time To turn on or turn off the LED light
Touch and hold To turn down or turn up the brightness
NOTE: The LED light output will gradually dim
during use. Please recharge the LED Light at this
time.