Filter
Top Products
8
Alarm Settings
1. Press the MODE button to change to Alarm mode.
2. Press the SET and UP/DOWN button to set your
alarm time, alarm internal in snooze mode, and ring
tone in order.
NOTE: Snooze mode is supported by the LED Light;
the alarm will ring for 1 minute on regular interval.
3. Press the SET button again to save the settings.
Other Display Settings
1. Press the UP button to select between 12-hour and 24-
hour time display.
2. Press the DOWN button to select between Fahrenheit
and Celsius temperature display.
3. Press the Alarm button to turn off the alarm.
Application
• Wall Mount
Peal off the protective cover from the adhesive tape on
the back of the Wall mount bracket, then press and
hold the Wall mount bracket to the wall for 5-10
seconds. IMPORTANT: The hook opening should
face up.
hook opening face
up
Figure 10