Filter
Top Products
OPERATING INSTRUCTIONS
20221081 / F 37
Third NAV2/POS display: the Satellite skyplot.
This display shows satellites in sight by the Sensor unit, and
which satellites the HS50 is tracking. The satellites are presented
according to satellite geometry. The bars on the left side of this
display indicate the signal-to-noise level for each satellite.
Info displays
When pressing the INFO button, the system will page through a
number of displays for information about system configuration
and performance. The information on some of these displays is
mainly used for troubleshooting the system.
In the GPS information display details for the position solution
is presented. This information is mainly for trouble shooting of
the system.
An explanation of the information shown is as follows:
HDOP
PDOP Quality indicators for the GPS solution.
Pos. accuracy Estimated accuracy on the position solution (RMS).
Vel. Accuracy Estimated RMS accuracy on the velocity solution (RMS).
Average sn gps1
Average sn gps2 Average signal-to-noise ratio on the GPS receiver 1 and 2.
Correction age Age of differential corrections. If HS50 receives no differential
correction, the displayed correction age will be high. See No
Differential corrections, page 47 for trouble shooting loss of
differential signal.
Diff. Station id Actual reference station utilized in the position solution.
UTC time World time referred to UTC.