Skil 3385-01 Saw User Manual


 
7
.
Unpacking and Checking Contents
To reduce the risk of injury, never
connect plug to power source outlet
u
ntil all assembly steps are complete and until you
h
ave read and understood the entire owner’s
manual.
Model 3385-01 Motorized Band Saw is shipped
complete in one box.
1. Unpacking and Checking Contents, separate all parts
from packing materials. Check each one with the “Table
of Loose Parts” to make sure all items are accounted for
before discarding any packing material.
If any parts are missing, do not at-
tempt to assemble the band saw, plug
in power cord or turn the switch on until the
missing parts are obtained and are installed
correctly.
2. Remove the protective oil that is applied to table and
base. Use any ordinary household type grease and spot
remover.
To avoid fire or toxic reaction, never
use gasoline, naptha or similar highly
volatile solvents.
3. Apply a coat of paste wax to the table and machined
surfaces of base to prevent rust. Wipe all parts
thoroughly with a clean dry cloth.
Table of Loose Parts
ITEM DESCRIPTION QTY.
A
Band Saw
1
B Table 1
C Table insert 1
D Fence 1
E
Miter gauge assembly 1
F 3 mm allen wrench 1
G
10 and 13 mm combination wrench 1
H Table bolt, washer, lock washer 4
I
Operating Guide 1
A
B
H
D
C
E
F
G
W
ARNING
!
WARNING
!
WARNING
!
I
SM 2610957105 05-08 6/5/08 7:39 AM Page 7