Filter
Top Products
7. Your device will automatically connect to the CHS. If a passkey is
requested, enter 1234. To indicate the connection, the CHS will
beep once, and the SocketScan icon will change to show an image
of the scanner.
Note: If you are using the
Socket SDIO or CF card, the
Socket Bluetooth icon in the
task tray will also begin
blinking to indicate that the
devices have connected.
If the Pocket PC suspends or the CHS is taken out of range, the
Bluetooth connection will be lost. After the Pocket PC comes out
of suspend mode or returns within range, SocketScan will try to
re-establish the connection every 10 seconds for 30
seconds.
For more information about the meanings of LEDs and beeps,
please see page 9.
20