Sony PEG-T415/G Planer User Manual


 
Chapter3 Exchanging and updating data using a HotSync
®
operation
116
Advanced HotSync
®
operations
3
Tap the Enter phone # field.
The Phone Setup dialog box is displayed.
4
Change the following settings if necessary:
1 Enter the telephone number used to access the modem connected to
your computer.
If necessary, enter a dial prefix (such as 9) to access an outside line,
and tap the Dial prefix check box. You can enter a comma in the field
to introduce a pause in the dialing sequence. Each comma equals a
two second pause.
2 If the phone line you are using for your CLIÉ handheld has Call
Waiting, select the Disable call waiting check box to avoid an
interruption during the modem HotSync operation.
3 If you want to use a calling card to place the call, select the Use
calling card check box and enter the calling card number.
Note
If you plan to connect to your companys dial-in server (network modem) instead
of connecting to a computer modem, see Conducting a HotSync
®
operation via a
network on page 119.
5
Tap OK.
The HotSync screen is displayed again.
Continued on next page