Filter
Top Products
-18-
For Machines Mfg. Since 8/09
Model SB1023
OPERATION
Controls
Refer to Figures 10–11 and the following
descriptions to become familiar with the basic
controls of this machine.
A.
Longitudinal Travel Handwheel: Moves the
table back and forth along the longitudinal
axis (X-axis).
B.
Center Table Stop: Provides a barrier for
the table stops to limit table movement.
C.
Table Stop: Adjusts along the length of the
table to limit longitudinal travel.
D.
Cross Axis Lock Knob: Locks the cross
table movement (Y-Axis).
E.
Elevation Handwheel: Controls vertical
movement of the grinding wheel assembly.
F.
Cross Travel Handwheel: Moves the table
forward and backward along the cross axis
(Y-axis).
G.
Spindle On Button: Supplies power to the
grinding wheel motor.
H.
Emergency Stop (Off) Button: Cuts power
to the grinding wheel motor.
Figure 11. Control panel.
H
G
Figure 10. Basic controls.
B
F
E
A
D
C