Filter
Top Products
-30-
For Machines Mfg. Since 8/09
SB1024/SB1025/SB1026
OPERATION
Graduated Index Rings
The table ball handles and elevation crank have
graduated index rings attached (see Figure
18) that are used to accurately determine table
movement in increments, as listed in the table
below:
Axis Individual
Increment
One Full
Revolution
X 0.001" 0.200"
Y 0.001" 0.200"
: 0.001" 0.100"
Table Locks
Refer to Figure 19 for the locations of the locks
used to secure the table in place.
Figure 18. Graduated table index rings.
Index Rings
Always keep the table locked in place unless
table movement is required for your operation.
Unexpected table and workpiece movement
could cause the cutter to bind with the
workpiece, which could result in personal
injury or damage to the cutter and workpiece.
Figure 19. Locations of table locks.
X-Axis Locks
Z-Axis
Locks
Y-Axis
Lock