Filter
Top Products
FG10-PG05 Service Manual ◄ 5
SAFETY PRECAUTIONS
Tool operators and maintenance personnel must always
comply with the safety precautions given in this manual
and on the stickers and tags attached to the tool and
hose.
These safety precautions are given for your safety. Re-
view them carefully before operating the tool and before
performing general maintenance or repairs.
Supervising personnel should develop additional pre-
cautions relating to the specic work area and local
safety regulations. If so, place the added precautions in
the space provided in this manual.
The model FG10 Hydraulic Frog Grinder or the model
PG05 Prole Grinder will provide safe and dependable
service if operated in accordance with the instructions
given in this manual. Read and understand this manual
and any stickers and tags attached to the grinder and
hose before operation. Failure to do so could result in
personal injury or equipment damage.
• The operator must start in a work area without by-
standers. Flying debris can cause serious injury.
• Do not operate the tool unless thoroughly trained or
under the supervision of an instructor. Establish a
training program for all operators to ensure safe op-
eration.
• Always wear safety equipment such as goggles, ear
and head protection, and safety shoes at all times
when operating the tool. Use gloves and aprons
when necessary.
• The operator must be familiar with all prohibited
work areas such as excessive slopes and danger-
ous terrain conditions.
• Maintain proper footing and balance at all times.
• Do not inspect, clean or replace the grinding wheel
while the hydraulic power source is connected. Do
not inspect or clean the tool while the hydraulic pow-
er source is connected. Accidental engagement of
the tool can cause serious injury.
• Always connect hoses to the tool hose couplers
before energizing the hydraulic power source. Be
sure all hose connections are tight and are in good
condition.
• Do not operate the tool at oil temperatures above
140°F/60°C. Operation at higher temperatures can
cause higher than normal temperatures at the tool
which can result in operator discomfort.
• Do not operate the tool with the wheel guard re-
moved.
• Do not operate a damaged, improperly adjusted, or
incompletely assembled grinder.
• Never wear loose clothing that can get entangled in
the working parts of the tool.
• Keep all parts of your body away from the rotat-
ing wheel. Long hair or loose clothing can become
drawn into rotating components.
• Keep the wheel off all surfaces when starting the
grinder.
• Do not use a wheel that is cracked, chipped or oth-
erwise damaged. Always inspect wheels for pos-
sible damage before installation or use.
• Always use wheels that conform to the specications
given in the OPERATION section of this manual.
• Do not reverse grinding wheel rotation direction by
changing uid ow direction.
• Do not move the tool until the wheel has stopped
rotating. Release the trigger if the power supply has
been interrupted.