Filter
Top Products
XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style 21of 36
Chapter 5: Maintenance
This chapter is intended for persons with skills in electrical and
mechanical areas due to their training and experience.
Personnel using the information in this chapter must be educated about
accident prevention, operating conditions, and safety regulations. Make
sure that all personnel are informed accordingly.
For maintenance work taking place at heights of over approx. 6 ft., use
only ladders or similar equipment and working platforms intended for this
purpose. At greater heights, personnel must wear the proper equipment
for protection against falling
.
Use only suitable lifting gear, which is in proper working order, and load
suspension devices with adequate carrying capacity.
Do not stand or work under suspended loads!
Make sure that the electric motors/switch cabinets are adequately
protected against moisture.
Use only proper work shop equipment.
Before starting maintenance work, appoint a supervisor.
Inform the responsible personnel before any maintenance work on the
system is started.
Never operate the equipment when it is partially disassembled.
All maintenance and repair work not described in this chapter may only be
carried out by service personnel or authorized personnel (appointed by the
manufacturer).