Filter
Top Products
9 10
BATTERY & CHARGE
Charge using a wall outlet
On your Mobile Hotspot, insert the small
end of the charger into the charging port.
Plug the other end of the charger into a wall
outlet.
Charge using a computer
You can also charge using the USB cable.
Insert the small end of the USB cable
into the charging port of your Mobile
Hotspot and the other end into the USB port
of your computer.
POWER
Press and hold the
Power key to power
your Mobile Hotspot
on or off.
CONNECTION & SETUP
You can easily connect up to ve Wi-Fi
enabled devices to the Internet using your
4G Mobile Hotspot.
IMPORTANT: you cannot connect to the
network using the USB cable. To connect
to the network, you must connect a Wi-Fi
enabled device to your Mobile Hotspot via
Wi-Fi.
Connect your Wi-Fi enabled computer
to your Mobile Hotspot
1. On your Mobile Hotspot, remove the
battery cover and battery.
2. Write down the default SSID and
password that are printed on the label in
the battery compartment.
3. Replace the battery and battery cover
and then power on your Mobile Hotspot.
4. On your computer, open the application
you use to connect via Wi-Fi.
5. Select the default SSID for your Mobile
Hotspot.
NOTE: If you do not see your SSID, your
Mobile Hotspot may have gone into
sleep mode. Quickly press the Power
key to wake the display and then press
the WPS key broadcast your SSID.