Filter
Top Products
Combi 650
-5-
General instructions for fitting
sub-bases to Router
1. Fit line-up guide bush onto sub-base, with
screws supplied.
2. Fit 12.7mm (
1
/2”) shank line-up pin into collet
of router. Plunge router until pin projects
through base and lock plunge.
3. Locate guide bush and sub-base assembly
over protruding pin.
4. Line up fixing holes and fit screws.
5. Now tighten up screws.
6. Remove line-up bush and line-up pin.
Alignment should now be correct. Fit 30mm
guide bush and cutter.
7. Periodically check the sub-base is concentric
to the spindle of the router.
UNIBASE comprises the following
Fits following Router Models
Atlas Copco OFSE2000
Bosch GOF 1300ACE, 1600A, 1700ACE
Casals FT2000VCE
DeWalt DW625EK, 629
Draper R1900V
Elu MOF 31, 77, 98, 131, 177(E)
Faithful FPPR2000E
Felisatti TP246(E), R346EC
Festo OF2000E
Freud FT2000E
Hitachi MI12V, M12SA, TR12
Metabo OF1612, OFE1812
Ryobi RE600N, R600N, RE601, R500, R502
Skil 1875U1
Wadkin R500
Description Order Ref.
Universal sub-base UNIBASE
t
r
e
n
d
3
0
m
m
R
GB30 30mm Guide Bush
Description Order Ref.
30mm guide bush to fit sub-bases GB30
UNIBASE
UNIBASE
170mm Ø
x 8mm
1
/4”+
1
/2”
shank
line-up pin
8mm +
12mm shank
line-up pin
1/2"
12mm
1/4"
8mm
16mm