Filter
Top Products
G. Adding Paging to Homes and Small Businesses with Single Line Phones
The C-1000A can be used to control a paging amplifier from a single phone line. The amplifier used must provide talk
battery, such as the PA-2A (Fax Back Document 485) or CPA-7B (Fax Back Document 455). If need be, a doorbox
or a second paging amplifier may also be added to the C-1000A Doorbox 2 terminals (see Installation section A).
Note: The C-1000A must be programmed to be in the Paging Mode, ✱4 (see Programming section B and Operation
section B).
VIKING
©
MODEL C-1000A
VIKING
ELECTRONICS
HUDSON, WI 54016
DOOR ENTRY/PAGING
CONTROLLER
POWER 13.8V AC
LINE IN PHONES STATUS
AUX. CONTACT
OUTPUT
DOOR
STRIKE 1
DOOR
BOX 1
DOOR BOX
POWER
DOOR
BOX 2
DOOR
STRIKE 2
3 4 5 6 7 8 9 10 11
12
12
or
C.O. Line
or Analog
PABX/KSU
station
Standard
Analog
Phones
Unused
Trunk
Input of
PABX/KSU
Talk Battery Switch
OFF ON
VIKING
©
MODEL PA-2A
13.8VAC
1 2 3 4 5
RINGING
LINES
PAGING/LOUD RINGING
AMPLIFIER SYSTEM
PAGING RINGING
BATTERY
FEED
1-3 4-6
OFF ON
VIKING
ELECTRONICS
HUDSON,WI 54016
13.8V AC
Adapter
included
120V AC
120V AC
F. Line Concentrator Mode (One Telcom Device Can Answer up to Three Lines)
VIKING
©
MODEL C-1000A
VIKING
ELECTRONICS
HUDSON, WI 54016
DOOR ENTRY/PAGING
CONTROLLER
POWER 13.8V AC
LINE IN PHONES STATUS
AUX. CONTACT
OUTPUT
DOOR
STRIKE 1
DOOR
BOX 1
DOOR BOX
POWER
DOOR
BOX 2
DOOR
STRIKE 2
3 4 5 6 7 8 9 10 11
12
12
Talk Battery Switch
OFF ON
Fax Machine
Line 2
Line 3
Red
Green
Red
Green
C.O. Line
or Analog
PABX/KSU
station
or
Answering
Machine
Standard
Analog Phone
C.O. Line
or Analog
PABX/KSU
station
C.O. Line
or Analog
PABX/KSU
station
Line 1
1 2 3
Dip Switches
ON
OFF
13.8V AC
Adapter
included
120V AC
The C-1000A can be used as a line concentrator, allowing up to 3 separate C.O. lines to connect to one telcom device.
1. Connect as shown below.
2. Move DIP switch 3 to the OFF position (see Programming section E).
3. Be sure the “Talk Battery Switch” is OFF.
4. See Operation section C.
(4)