Wagner SprayTech 110v Paint Sprayer User Manual


 
6
Super Finish 23 PLUS
GB
1.19 WORK AT ELECTRICAL COMPONENTS
Unplug the power plug from the outlet before carrying out
any repair work.
SAFETY REGULATIONS
1.20 SETUP ON AN UNEVEN SURFACE
The front end must always point downwards in order to avoid
sliding away.
If possible do not use the unit on an inclined surface since the
unit tends to wander through the resulting vibrations.
2 GENERAL VIEW OF APPLICATION
2.1 APPLICATION
Super Finish 23 PLUS is an electric driven unit for the airless
atomization of dierent painting materials. Also it is able to
feed the internal feeded paint roller, which is available as ac-
cessory.
Super Finish 23 PLUS is made for jobs in the workshop and on
the building site.
The unit performance is conceived so that its use is possible
on building sites for small- to middle-area dispersion work.
When painting, the device is suitable for all kinds of typical
painting jobs, e.g.:
doors, door frames, balustrades, furniture, woodencladding,
fences, radiators (heating) and steel parts.
We recommend using the top container for paintwork.
2.2 COATING MATERIAL
Diluting lacquers and paints or those containing solvents, two-
component coating materials, dispersion and latex paints.
No other materials should be used for spraying without WAG-
NER‘s approval.
Pay attention to the Airless quality of the
coating materials to be processed.
The unit is able to process coating materials with up to
20,000 mPas. If highly viscous coating materials cannot be
taken in or the performance of the unit is to low, the paint
must be diluted in accordance with the manufacturer‘s in-
structions.
Attention: Make sure, when stirring up with
motor-driven agitators that no air bubbles
are stirred in. Air bubbles disturb when spray-
ing and can, in fact, lead to interruption of
operation.
2.2.1 COATING MATERIALS WITH SHARPEDGED
ADDITIONAL MATERIALS
These particles have a strong wear and tear eect on valves
and tips, but also on the heating hose and spray gun. This im-
pairs the durability of these wearing parts considerably.