Wagner SprayTech 3.23 Paint Sprayer User Manual


  Open as PDF
of 32
 
16 ProSpray 3.23
GB
Repairs at the unit
17. Carefullytightenretainernut(5)withadjustingwrench
18. Slidethetopofthepiston(3)intotheT-slot(9)onthe
sliderassembly(4).
19. Positionthepumpmanifold(2)underneaththegearunit
housing and push up until it rests against the gear unit
housing.
20. Attachpumpmanifold(2)tothegearunithousing.
21. Screwpumpmanifold(2)tightlytogearunithousing.
22. LubricateO-ring(Fig.11,Item6)betweenpumpmanifold
(2)andinletvalvehousingwithmachinegrease.Screw
inlet valve housing to the pump manifold.
23. Insert the elbow on the siphon assembly into the bottom
of the pusher stem housing. Push the retaining clip up
into the groove inside the foot valve housing to secure the
siphon assembly in position. Place the return tube over
thereturntubettingandsecurewiththeclip.
24. Install front cover.
11.4 ProSpray 3.23 connection diagram
LOAD
LINE
Switch
White
Black
Black
White
White
Red
Black
Black
Red
Red (+)
Black (-)
Black
Power Cord
Ground
Capacitor
Surge suppressor
Motor controller
Pressure sensor
L.E.D.
Hall sensor
Fuse block
Fuse
Potentiometer
Motor
EMI Filter
Uncontrolled Copy
 previous next