Wagner SprayTech 3.23 Paint Sprayer User Manual


  Open as PDF
of 32
 
8 ProSpray 3.23
GB
Description of unit Starting operation
3.5 Technical data
Voltage: 220~240Volt,50/60Hz
Max. current consumption: 5.5 A
Power cord: 3 x 1.5 mm
2
– 6 m
Acceptance capacity: 1035 Watt
Max. operating pressure: 221bar(22,1MPa)
Volume ow at 12 MPa
(120 bar) with water: 2.3 l/min
Max tip size: 0.024 inch – 0.61 mm
Max. temperature of the
coating material: 43°C
Max viscosity: 20.000 mPa·s
Weight: 17.7 kg
Special high-pressure hose:DN6mm,15m,connection
thread M 16 x 1.5
Dimensions (L X W X H): 436 x 369 x 416 mm
Max sound pressure level: 80dB(A)*
* Placeofmeasuring:1mindistancefromtheunitand1.6
mabovetheoor,12MPa(120bar)operatingpressure,
reverberantoor.
3.6 Transportation in vehicle
Secure the unit with a suitable fastening.
4. Starting operation
4.1 High-pressure hose, spray gun and
separating oil
1. Screwthepressuregauge(1)tothecoatingmaterial
outlet(Fig.2,Item2).
2. Screwthehigh-pressurehose(3)tothecoatingmaterial
outletonthepressuregauge(Fig.2,Item4).
3. Screwthespraygun(5)withtheselectedtipontothe
high-pressure hose.
4. Tightentheunionnutsatthehigh-pressurehosesrmly
so that coating material does not leak.
5
1
4
2
3
5. Remove the oil cup cap with a straight-slot screwdriver.
6. FilltheoilcupwithEasyGlide(Fig.3)untiltheoilgauge
(6)isshowingthatitisfull.
Attention
EasyGlide prevents increased wear and tear to
the packings.
7. Replace oil cup cap.
8. Press oil button 2-5 times to prime the oiler. Press once
foreveryeighthoursofusagetolubricatetheuidsection.
9. Fully depress the pusher stem to make sure the inlet ball
is free.
Uncontrolled Copy
 previous next