Wagner SprayTech 558022 Paint Sprayer User Manual


  Open as PDF
of 32
 
ProSpray 3.25 11
GB
Starting operation
Volume Pumped Screen
VOLUME PUMPED
SELECT-4MENU-1
TheVolumePumpedscreenshowsthe
total number of gallons or liters sprayed by
the sprayer.
VOLUME PUMPED
SELECT-4MENU-1
ToselecttheVolumePumpedscreen,press
the #4 key.
Job Volume Screen
JOB VOLUME
SELECT-4MENU-1
TheJobVolumescreenallowstheuser
to reset a liter counter to track usage on
specic jobs.
GALLONS XXXX
RESET-3MENU-1
ToselecttheJobVolumescreen,pressthe
#4 key.
Unit Serial # Screen
UNIT SERIAL #
SELECT-4MENU-1
TheUnitSerial#screenshowsthesprayers
serial number.
SER # XXXXXXXXXX
MENU-1
ToselecttheUnitSerial#screen,pressthe
#4 key.
Timers Screen
TIMERS
SELECT-4MENU-1
The Timers screen shows the total time the
sprayer has been turned on as well as the
total time the sprayer has been running (pumping).
ON TIME
RUN TIME
XXXX
XXXX
To select the Timers screen, press the #4
key.
Job Timers Screen
JOB TIMERS
SELECT-4MENU-1
The Job Timers screen allows the user to
resetthe“ONTIME”and“RUNTIME”to
track time on specic jobs.
JOB ON X
RESET-3MENU-1
JOB RUN X
RESET-3MENU-1
To select the Job Timers screen, press the
#4key.“JOBON”screenwillappear.Press
#3toreset.Press#1tocontinueto“JOB
RUN”screen.Press#3toreset.Press#1
to scroll through the remaining menu
screens.
Service Time Screen
SERVICE TIME
SELECT-4MENU-1
The Service Time screen allows the user to
set a service time interval (in hours). Below
the set time, the screens shows the current amount of hours on the
sprayer since the last activation of the service timer. To select the
Service Timer screen, press the #4 key.
SERVICE @ XX
RUN HOURS XX
To set the service time, press the #2 (up)
and/or the #3 (down) keys to the desired
time (run hours will increase/decrease in increments of 25 for each
time you press a key).
When the service time interval is set and met by the run hours, the
displaywillshowa“ServiceRequired”screen.Thepumpwillremain
functional. To return to the Main Screen, press the #1 key. Doing so
willresetthe“Service@”and“RunHours”displayedontheService
Screen back to 0.
Security Code Screen
SECURITY CODE
CHANGE-2MENU-1
The Security Code screen allows the user
to set a four digit security code to prevent
unauthorizeduseofthesprayer.Ifasecuritycodehasbeenset,the
control system display will ask for the code at startup. If the correct
code is entered, the display will show the Main Screen and the
sprayer will operate. If the wrong code is entered, the display will
continue to ask for the correct code and the sprayer will be disabled.
To set or change the security code, press the #2 key.
i
If the sprayer is new, no security code is set and the
Main Screen will appear at startup. When setting a
security code for the rst time, the “Enter Old Code
Number” screen will appear, and you will need to
enter “1111”.
ENTER OLD CODE
NUMBER
Enter the old security code number to
access the screen that allows the code
change. If the wrong code is entered, the display will continue to ask
for the correct code and the security code cannot be changed.
ENTER NEW CODE
NUMBER XXXX
RE-ENTER NEW
NUMBER XXXX
NEW CODE NUMBER
ACCEPTED
Enter the new security code. Once the
new code is entered, the display will
automatically ask that the new code be
re-entered for verication. If the same new
code is re-entered, the display will conrm
that the new code has been accepted and
return to the Main Screen. If the new code
isre-enteredincorrectly,thedisplaywillreturntothe“EnterNew
CodeNumber”screenandtheprocesswillrepeat.
If you forget or misplace your security code, you can contact Wagner
customer service for assistance.
i
To inactivate the security function, enter “1111” at
the “Enter New Code Number” screen (this is the
default code that leaves the sprayer unlocked). As a
result, the Main Screen will appear at sprayer startup.
Prime Screen
PRIME
The Prime screen appears when the
pressurecontrolknobissetatthe“MIN”
setting.
Rapid Clean Screen
RAPID CLEAN
The Rapid Clean screen appears when the
pressure control knob is set at the RAPID
CLEANpositionandthePRIME/SPRAYvalveisinthePRIMEposition.
i
If there is no action at any menu screen for 30
seconds, the display will go back to the Main Screen.
 previous next