Filter
Top Products
GA 250AL_GA 400AL.
24
%
&
'
)
(
+
(
'
)
+
"?
OPERATING MANUAL
EDITION 07 /2005 PART NO. DOC0350941
6.2.2 REASSEMBLING THE VALVE STEM AND THE SPRAY GUN
1. Place the sealing screw (F), the packing (G), the thrust piece (H), the disc spring set (6
pieces) (I), and the pressure ring (K) on the valve stem (E).
Note:
The disc springs (I) have to be arranged correctly
2. Insert the premounted valve stem into the housing.
3. Sealing screw (F) screw in and only so far carefully pull tight, until when shifting the
valve rod (E) a lighter resistance is noticeable.
4. Fit the piston (D), the compression spring (B), and the tension cap (A) in revers order
acc. paragraph 6.2.1, step 5 to 2.