Filter
Top Products
DIN-A-MITE Style D, solid-state power controller
Part Number D
D 1 0 - __ __ __ __ - __ __ __ __
Phase
1 = Single-phase, one
controlled leg
Cooling and Current Rating
0 = Natural convection; current rating
80A @ 50°C (122°F)
Note: See the output rating curve
for the current rating at other
temperatures.
Line and Load Voltage
02 = 24 to 48VÅ (ac)
24 = 120 to 240VÅ (ac)
48 = 277 to 480VÅ (ac)
60 = 277 to 600VÅ (ac)
Input Control Signal
C0 = 4.5 to 32VÎ (dc) contactor
F0 = 4 to 20mAÎ (dc) proportional
F1 = 12 to 20mAÎ (dc) proportional
K1 = 22 to 26VÅ (ac) contactor
K2 = 100 to 120VÅ (ac) contactor
K3 = 200 to 240VÅ (ac) contactor
Current Sensing or Alarm
0 = None
1 = Load current transformer
S = Shorted SCR alarm
User Manual Language
0 = English
1 = German
2 = Spanish
3 = French
Custom Options
00 = Standard
Ordering Information
Output Rating Curve
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70
25
30
35
40
45
50
55
60
65
70
75
80
85
Current (Amperes) Into a Resistive Load
Maximum Ambient Temperature Inside Cabinet (°C)
DIN-A-MITE Style D Natural Convection at 100% on
75 80 85 90 95 100105
WATLOW DIN-A-MITE Style D User’s Manual 3
ç
Ó
3
5
203 mm
(8.00 in)
203 mm (8.00 in) clearance for air
flow and bending radius
203 mm
(8.00 in)
203 mm (8.00 in) clearance for air flow and bending radius
178 mm
(7.00 in)
185 mm
(7.28 in)
13 mm
(0.50 in)
13 mm (0.5 in) clearance
for air flow
Unit Dimensions
Allowance For No. 10 Fastener
Metric = M5
54 mm
(2.13 in)
13 mm
(0.50 in)
67 mm
(2.63 in)
67 mm
(2.63 in)
61 mm
(2.38 in)
239 mm
(9.41 in)
66 mm
(2.58 in)
64 mm
(2.50 in)
Grounding Screw
9.5 mm minimum diameter (3/8 in to 16 UNC)
Top
Side
Mounting
Footprint
ç WARNINGS:
Ó
3
WARNING: Only authorized and qualified
personnel should be allowed to install and
perform preventive and corrective maintenance
on this unit. Failure to do so could result in
damage to equipment, and personal injury or
death.
5
WARNING: Hot surface, do not touch the heat
sink. Failure to follow this guideline could result
in personal injury.
Note:
• Recommended fusing options to meet 200KA SCCR, type 1 and
2 approved. All other fuse combinations are defaulted to 5KA
SCCR per UL508A and NEC guidelines.
Watlow part number: 0808-0096-0000
Bussmann part number: 170N3437