Filter
Top Products
12 Freedom HF Owner’s Guide
Freedom Inverter/Charger Configuration
To change the inverter mode setting:
By default the inverter mode is set to ON (“”).
ON (“”) will put the inverter on standby. This means when shore power
is present, AC shore power will pass through as AC output. And when
shore power is not available, the inverter function will take power from the
battery and provide AC output power. When the inverter mode is ON, you
can manually turn the inverter function ON or OFF by using the Inverter
Power button. See “Operating in Inverter Mode” on page 17.
OFF (“”) will completely disable inverter function. This means when
shore power is present, AC shore power will still pass through as AC
output. However, when shore power is not available, the inverter function
remains disabled and therefore no AC output power. When the inverter
mode is OFF, you cannot manually turn the inverter function ON or OFF by
using the Inverter Power button.
1. Press and hold the Inverter Power button for five seconds.
2. Press the Inverter Power button once.
The LED screen will flash “” intermittently.
3. Press the Select button once.
The LED screen will display the present (or most recent) inverter
mode setting.
Example, “” for an inverter mode setting of ON or “” for an
inverter mode setting of OFF.
4. Continue pressing the Select button to cycle through the two settings –
“” and “” until you reach the desired setting.
5. Press and hold the Select button for five seconds to make the setting
permanent.
AC Input Circuit Breaker
or fuse size (Amps)
Charger DC Current
Setting (Amps)
Maximum By-pass AC
Current Available (Amps)
All other
models
Freedom HF
1055
15 2
5
12.5
5
a
a. Available only for the Freedom HF 1000 and 1055 models.
12.5
10 15 9.5
20 35 4.0
40
b
b. Available only for Freedom HF 1800 models.
55 0
20 2
5
17.5
5
a
17.5
10 15 14.5
20 35 9.0
40
b
55 5.0
30 2
5
27.5
5
a
27.5
10 15 24.5
20 35 19.0
40
b
55 15.0
Freedom HF InvChg Owners Guide.book Page 12 Thursday, November 24, 2011 11:20 AM