Xantrex Technology 806-1020 Welding System User Manual


 
iv Freedom HF Owner’s Guide
Important Safety Instructions
IMPORTANT: READ AND SAVE THIS OWNERS GUIDE FOR FUTURE
REFERENCE.
This chapter contains important safety instructions for the Freedom HF
Inverter/Charger (Freedom HF). Each time, before using the Freedom HF,
READ ALL instructions and cautionary markings on or provided with the
inverter/charger, the batteries, and all appropriate sections of this guide.
NOTE: The Freedom HF contains no user-serviceable parts. See Warranty
Card for guidance.
NOTE: Turning off the inverter/charger using the on/off switch on the front
panel will not reduce an electrical shock hazard.
ELECTRICAL SHOCK HAZARD
Do not expose the Freedom HF to rain, snow, spray, or bilge water.
This inverter/charger is designed for marine applications only when
additional drip protection is installed in certain orientations. See the
installation guide for information.
Do not operate the inverter/charger if it has received a sharp blow,
been dropped, has cracks or openings in the enclosure including if the
fuse cover has been lost, damaged, or will not close, or otherwise
damaged in any other way.
Do not disassemble the inverter/charger. Internal capacitors remain
charged after all power is disconnected.
Disconnect both AC and DC power from the inverter/charger before
attempting any maintenance or cleaning or working on any circuits
connected to the inverter/charger. See note below.
Do not operate the inverter/charger with damaged or substandard
wiring. Make sure that all wiring is in good condition and is not
undersized.
Failure to follow these instructions will result in death or serious
injury.
Freedom HF InvChg Owners Guide.book Page iv Thursday, November 24, 2011 11:20 AM