Filter
Top Products
AM16905-001 Rev.A pg. 3 of 10
ELECTRICAL INFORMATION
100 - 240 VAC, 50-60 Hz
CAUTIONS
Installation
To ensure that the Charger has proper cooling, do not place any padding or cushioning
material under the unit or next to the back of the unit.
Use of Shielded Data Cable
Printers comply with international regulations governing radiated emissions when using fully
shielded data cables. Data cables must be fully shielded and fitted with metal or metallized
connector shells. Shielded data cables and connectors are required to prevent radiation
and reception of electrical noise. Use of unshielded data cables may increase radiated
emissions above the regulated limits.
AC Power Considerations
Many areas of the world have specific power requirements. The power supply of the AC
charger has interchangeable primary (mains) adapters. Use the mains plug specific to the
country or origin of use.
Use the table below as a reference:
Plug typePlug type
Plug typePlug type
Plug type
Zebra mains plug p/nZebra mains plug p/n
Zebra mains plug p/nZebra mains plug p/n
Zebra mains plug p/n
Area of use Mains Adapter p/n
U.S./Japan* AT15309-1
U.K. AT15309-2
Euro AT15309-3
Australia AT15309-4
*supplied as standard