Zebra Technologies RP Battery Charger User Manual


 
19 UMAN-Charge
The condition cycle for a fully charged battery is approxi-
mately 90 minutes.
If the “Charge OK” indicator blinks, disconnect the battery
pack and wait until all the lights except the “Power “ light go
out. Reconnect the battery and repeat step 3.
UC Series Charger Models
Base Part Number* Used on Charge Method
CC12708-1x MP5020/22 Cable
CC12708-2x MP5030 Cable
CC12708-3x MP5044 Cable
CC12708-5x RP3 Cable to Printer
CC12891-1x RP3 Battery Drop-In
CC12708-7x Encore 2,3, Cameo
Cable
CC12708-8x Encore 4
Cable
* Last digit in part number Indicates model:
-X0 = North American model
-X1 = U.K. model
-X2 = Continental European model
-X3 = Australian model
† These models use NiMH type battery packs. Conditioning is not necessary
once batteries have been cycled several times. A NiMH battery is” cycled” by
fully charging it, then fully discharging it through normal use. The “Condition”
cycle on UC series chargers can also be used for this purpose.