Zebra Technologies RP Battery Charger User Manual


 
5 UMAN-Charge
F
a
u
lt
F
a
st C
h
a
rg
e
F
u
l
F
u
ll C
h
a
rg
e
F
a
u
lt
F
a
s
t C
h
arg
e
R
e
a
d
y
continued on next page
UCLI72-4 Quad Charger
Description
The UCLI72-4 Quad Charger is designed to charge up to
four Lithium-Ion (LIon) QL series Mobile Printer battery
packs simultaneously. The unit is supplied with an external
110/220 VAC power supply and a line cord compatible with
its country of use.
Setting up the Charger
Place the Quad Charger on a surface near an A.C. outlet.
There are four mounting holes in the bottom of the charger
which allow it to be secured to a table or
shelf to help ensure the charging process
will not be interrupted by someone
inadvertently moving or unplugging
either the charger or the battery
packs under charge.
Plug the circular four pin plug
from the power supply into the
back of the charger. Plug
one end of the AC cord
into the Power Supply
and the other into the
A.C. power source. The
power indicator on the
front panel should come
on, indicating the Quad
Charger is ready for use.
Please refer to Figure 2.
Charging Batteries
Ensure that the power
indicator on the front
panel is on.
Plug a battery pack into
any one of the four
charging bays as shown.
Charger Bay
Fast Charge
Indicator
1. Slide
Battery Pack
into Charger
bay
FIGURE 1: INSERTING THE
BATTERY PACK
1. Rock
Battery Pack
into place