Zebra Technologies RP Battery Charger User Manual


 
Proprietary Statement
This manual contains proprietary information of Zebra Technologies Corporation. It is
intended solely for the information and use of parties operating and maintaining the
equipment described herein. Such proprietary information may not be used,
reproduced, or disclosed to any other parties for any other purpose without the
expressed written permission of Zebra Technologies Corporation.
Product Improvements
Since continuous product improvement is a policy of Zebra Technologies Corporation,
all specifications and signs are subject to change without notice.
FCC Compliance Statement
NOTE: Applicable equipment described in this manual has been tested and found to
comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules.
These limits are designed to provided reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
NOTE: Equipment described in this manual were tested with shielded cables on the
peripheral devices. Shielded cables must be used with equipment described in this
manual to insure compliance.
Changes or modifications to equipment described in this manual not expressly
approved by Zebra Technologies Corporation could void the user’s authority to operate
this equipment.
Liability Disclaimer
Inasmuch as every effort has been made to supply accurate information in this
manual, Zebra Technologies Corporation is not liable for any erroneous information or
omissions. Zebra Technologies Corporation reserves the right to correct any such
errors and disclaims liability resulting therefrom.
No Liability for Consequential Damage
In no event shall Zebra Technologies Corporation or anyone else involved in the
creation, production, or delivery of the accompanying product (including hardware and
software) be liable for any damages whatsoever (including, without limitation,
damages for loss of business profits, business interruption, loss of business
information, or other pecuniary loss) arising out of the use of or the results of use of or
inability to use such product, even if Zebra Technologies Corporation has been
advised of the possibility of such damages. Because some states do not allow the
exclusion of liability for consequential or incidental damages, the above limitation may
not apply to you.
Copyrights
The copyrights in this manual and the system described therein are owned by Zebra
Technologies Corporation. All rights are reserved. Unauthorized reproduction of this
manual or the software in any of the system modules may result in imprisonment of up
to one year and fines of up to $10,000 (17 U.S.C.506). Copyright violators may be
subject to civil liability.
All products and brand names are trademarks of their respective companies. All
rights reserved.
©
2002 Zebra Technologies Corporation