Configuring the LAN Modem from a Remote Location 93
Configuring the LAN
Modem Remotely via an
Analog Modem
To dial into a LAN Modem from a remote location using an analog modem and
Windows 95/98 Dial-Up Networking, follow these steps:
1 Click Start, Programs, Accessories, (Windows 98 users select Communications)
and select Dial-Up Networking.
2 Double-click Make New Connection.
The Make New Connection window opens.
3 Enter a name to designate this dial-up profile, such as LAN Modem.
4 Select the modem attached to your local PC from the drop-down list box, and click
Next.
The Make New Connection phone number window will open.
5 Enter the phone number of the remote LAN Modem to which you wish to connect
and click Next.
6 Click Finish to complete the Make New Connection setup.
You will now have a new icon for the connection just created.
7 Right-click this new icon, and choose Properties.
8 Click the Server Type tab.
For Windows 95 users: PPP, Windows 95, Windows NT 3.5, Internet should be
chosen in the Type of Dial-Up Server list box.
For Windows 98 users: PPP, Internet, Windows NT Server, Windows 98, should be
chosen in the Type of Dial-Up Server list box.
9 Under Advanced Options, uncheck all boxes.
10 Choose the TCP/IP check box for Allowed Network Protocols. Uncheck the boxes
for NetBEUI and IPX/SPX Compatible.
11 Click TCP/IP Settings.
The TCP/IP Settings window opens.
12 Click Specify an IP address and enter an IP address for your computer. Enter
192.168.2.1 if you are not sure.
13 Leave the other options for this window at their default settings, including the
radio button for Server assigned name server addresses.
14 Click OK to close the TCP/IP Settings window.
15 Click OK to close the Server Types window.
16 Click OK to close your connection window.
17 Double-click your new connection icon created via Dial-Up Networking.
The Connect To window will open.
18 Enter the Remote Administration Username and Password that was assigned to
the Dual 56K LAN Modem. By default, the Username is Admin, and the Password
is 1234.
19 Click Connect.
Your local computer will dial and establish a connection with your remote LAN
Modem.
