4
LOADING NETWORK
DRIVERS
This chapter describes how to load the network driver required
to let the Fast EtherLink EISA adapter operate with your
network operating system. Figure 4-1 shows an overview of
these procedures.
Figure 4-1 Overview of Loading Network Drivers
If you are using Novell
â
NetWare
â
2.x, 3.1x, or 4.x, you can
use 3Com’s AutoLink
ä
auto installation feature, which
automatically loads all the NetWare DOS ODI client software,
including drivers. Follow the instructions in the section
“Loading NetWare ODI Drivers.”
If you are running Windows 95, you must import the driver
from the EtherDisk diskette. Follow the instructions in the
section “Loading Windows 95 Drivers” later in this chapter.
If you are running any other network operating system,
follow the driver loading instructions in the section “Loading
Non-NetWare Drivers” later in this chapter.
1
Locate network drivers.
2
Access DOS.
3
Load the drivers.
A
B
NetWare
(Client/server)
Windows 95 Non-NetWare
(NDIS or other)
