4-12 CHAPTER 4: LOADING NETWORK DRIVERS
The 3C59X EtherDisk diskette contains a NetWare 4.x server
driver (3C59X.LAN) and the NetWare Loadable Modules
(NLMs) that enable the NetWare 4.x driver to be used with
NetWare 3.11, 3.12, or 4.0x software. These files are found in
the \NETWARE\SERVER subdirectory.
Finding the Adapter’s Port Address for Multiple
Adapters
You must use the adapter’s port address when installing one
or more adapters in a server. You must use the adapter’s slot
number when installing one or more adapters in a client.
To find the appropriate adapter’s port address when
installing more than one adapter in a NetWare server, follow
these steps.
1 Access the main menu on the EtherDisk diskette.
a Boot the computer under DOS.
b Insert the EtherDisk diskette in a floppy drive and make
that drive the active one.
c At the prompt, type:
INSTALL [Enter]
The main menu appears.
2 Select Configuration/Diagnostic/Troubleshooting, and
press [Enter].
3 In the next screen, select Configuration and Diagnostic
Program, and press [Enter].
If multiple adapters have been installed, the screen that
appears will list them.
4 Select the adapter whose port address you want.
5 Select View in the menu bar, and press [Enter].
The screen that appears contains the desired I/O port
address. Make a note of the address.
