8-8 CHAPTER 8: TROUBLESHOOTING
Microkey Error Codes
Table 8-2 lists Microkey error codes, possible causes, and
possible solutions regarding installation of the Microkey Com
Port Accelerator card for Windows 3.x.
Table 8-2 Microkey Error Codes and Their Meaning
Error Code Possible Cause Solution
1001 Cannot find or copy the file
s7comm.drv.
Check the 3COM directory and
reinstall the 3C882 ISDN modem
software.
1002 Cannot find or copy the file
s7vcd.drv.
Check the 3COM directory and
reinstall the 3C882 ISDN modem
software.
1003 Cannot find or copy the file
s7combuf.drv.
Check the 3COM directory and
reinstall the 3C882 ISDN modem
software.
1004 Cannot create a backup SYSTEM.INI
file.
Reinstall the 3C882 ISDN modem
software.
1005 Cannot remove *vcd from the
SYSTEM.INI file.
An unknown third-party device
driver may exist on the computer.
Please contact 3Com Technical
Support for further assistance.
1006 Cannot remove *combuf from the
SYSTEM.INI file.
An unknown third-party device
driver may exist on the computer.
Please contact 3Com Technical
Support for further assistance.
1007 Cannot remove comm.drv from the
SYSTEM.INI file.
An unknown third-party device
driver may exist on the computer.
Please contact 3Com Technical
Support for further assistance.
1008 Cannot configure the SYSTEM.INI file
for s7comm.drv.
Reinstall the 3C882 ISDN modem
software. and/or contact 3Com
Technical Support.
1009 Cannot configure the SYSTEM.INI file
for s7vcd.drv.
Reinstall the 3C882 ISDN modem
software. and/or contact 3Com
Technical Support.
1010 Cannot configure the SYSTEM.INI file
for s7comm.buf.drv.
Reinstall the 3C882 ISDN modem
software. and/or contact 3Com
Technical Support.
1021 Cannot remove TURBOVCD.386 from
the SYSTEM.INI file.
Try to remove these items
manually and/or contact 3Com
Technical Support.
