3-8 CHAPTER 3: CONFIGURATION FOR AN IBM-COMPATIBLE PC RUNNING WINDOWS
A message bar at the bottom of the dialog box provides status
information about the 3C882 ISDN modem.
The Configuration dialog box buttons do the following.
Help. Click the Help button to access help for the
Configuration dialog box. There is also comprehensive
on-line help accessible from the 3ComImpact IQ program
group box.
Tools. Clicking on the Tools button produces buttons for
Firmware, Tests, Save and Restore.
■ Firmware. Refer to the readme file for firmware download
instructions.
■ Tests. Use the Tests tool only under the direction of
technical support personnel.
■ Save. Pressing the Save button saves the current
Configuration dialog box settings in a file you name. You
can easily restore a previously saved file to the
Configuration dialog box.
■ Restore. Pressing the Restore button restores the 3C882
ISDN modem to a previously saved configuration file.
Update. Click the Update button to download any
configuration parameter changes made to the Configuration
dialog box. After you click the Update button, the name
changes to Updated to indicate that the changes have been
saved to your ISDN modem’s S registers.
Exit. Click Exit to leave the Configuration dialog box.
Running the SPID Wizard Again
The SPID Wizard automatically runs when you are
configuring the 3C882 ISDN modem for the first time, if you
connect the 3C882 ISDN modem to a different ISDN line, or if
your ISDN line parameters should change (e.g., your area
code). After the ISDN switch type, telephone number(s), and
