User Command Specifications
9．Details of command RANGE ACADJUST
RANGE ACADJUST
RANGE ACADJUST
RANGE□ACADJUS
r:ACADJUST=I, <Setting option 1>, <Setting option 2>, …, <Setting option n>
-1
A "busy" response is given while the zoom or focus lens is being driven.
-2
> RANGE ACADJUST
< r:ACADJUST=I, NOCORRECT, MEM_L, MEM_M, MEM_H, 6AX
* Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command State
OFF ON PM
× ○ ×
–––
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
(Refer to the ZCONTDRV command and FCONTDRV command.)
The advanced color adjustment can be set by the ACADJUST command.
Command
supported
Example
01.01**
Reference
For all other responses, refer to "Error List."
Advanced color adjustment option reques
This inquires about the parameter options which enable the advanced color adjustment to be set.
ID
Mode
Commands
Function
Format
Description
Response
Control
Setting
Model Power
Input
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video
Mode
Remote Local
Remarks
SCART None
SX50
×××○○○––○○×
SX6
–––––––––––
SX60
X600
01.01** 01.01**
SX50 SX6 SX60 X600
○ ×××
01.00**
PAGE 151
